Asterisk@home 2.5 bristuffed

Tutto quello riguardante le schede Analogiche e Digitali

Moderatore: phpBB Moderatori

Messaggioda donDisperato » dom feb 26, 2006 2:38 pm

[size=20px]A@h 2.5 with Asterisk 1.2.1-BRIstuffed-0.3.0-PRE-1f and flortz patch[/size]

how to install hfc card
after unload asterisk and amportal whit
amportal stop

type "setup"
unselect zaptel in system service...
and set the lan

--->reboot<---

cd /usr/src
wget http://www.junghanns.net/downloads/bris ... -1f.tar.gz
tar -zxvf bristuff-0.3.0-PRE-1f.tar.gz
cd bristuff-0.3.0-PRE-1f
./download.sh
cd zaphfc
wget http://zaphfc.florz.dyndns.org/zaphfc_0 ... 11.diff.gz
gunzip -v zaphfc_0.3.0-PRE-1f_florz-11.diff.gz
patch < zaphfc_0.3.0-PRE-1f_florz-11.diff
ln -s /usr/src/2.6.9-22.EL /usr/src/linux-2.6
cd ..
cd zaptel-1.2.1
make clean
make
make install
cd ..
cd libpri-1.2.1
make clean
make
make install
cd ..
cd zaphfc
make clean
make

cp zaptel.conf /etc/zaptel.conf
------>yes<-------

nano /etc/rc.d/rc.local

at first add this line:

modprobe zaptel
insmod /usr/src/bristuff-0.3.0-PRE-1f/zaphfc/zaphfc.ko
sleep 10
ztcfg -vv

nano /etc/asterisk/zapata.conf

this is my zapata:



[channels]
language=it
switchtype=euroisdn
;If you connect to a hicom PBX set your ISDN Numbering Plan Identifier to unknown.
pridialplan=local
prilocaldialplan=local


signalling = bri_cpe_ptmp
;signalling = fxs_ks
rxwink=300

usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=0.0
txgain=0.0
nationalprefix = 0
internationalprefix = 00
faxdetect=incoming
group=0
callgroup=1
pickupgroup=1
immediate=yes
context=from-pstn
channel => 1-2

________________________________________
now you can recompile asterisk
cd /usr/src/bristuff-0.3.0-PRE-1f/asterisk-1.2.1
make clean
make
make install

reboot...
________________________________________


that's all

[size=20px] donDisperato[/size]
Ultima modifica di donDisperato il dom feb 26, 2006 7:25 pm, modificato 1 volta in totale.
Avatar utente
donDisperato
Expert
Expert
 
Messaggi: 876
Iscritto il: mar mag 10, 2005 8:54 am
Località: Bari
Ha ringraziato: 1 volta
Hai ringraziamenti: 4 volte

Messaggioda donDisperato » dom feb 26, 2006 3:04 pm

[size=20px]A@h 2.5 with Asterisk 1.2.4-BRIstuffed-0.3.0-PRE-1l without flortz patch[/size]

how to install hfc card
after unload asterisk and amportal whit
amportal stop

type "setup"
unselect zaptel in system service...
and set the lan

--->reboot<---

cd /usr/src
wget http://www.junghanns.net/downloads/bris ... -1l.tar.gz
tar -zxvf bristuff-0.3.0-PRE-1l.tar.gz
cd bristuff-0.3.0-PRE-1l
./download.sh
ln -s /usr/src/2.6.9-22.EL /usr/src/linux-2.6
cd zaptel-1.2.3
make clean
make
make install
cd ..
cd libpri-1.2.2
make clean
make
make install
cd ..
cd zaphfc
make clean
make

cp zaptel.conf /etc/zaptel.conf
------>yes<-------

nano /etc/rc.d/rc.local

at first add this line:

modprobe zaptel
insmod /usr/src/bristuff-0.3.0-PRE-1l/zaphfc/zaphfc.ko
sleep 10
ztcfg -vv

nano /etc/asterisk/zapata.conf

this is my zapata:



[channels]
language=it
switchtype=euroisdn
;If you connect to a hicom PBX set your ISDN Numbering Plan Identifier to unknown.
pridialplan=local
prilocaldialplan=local


signalling = bri_cpe_ptmp
;signalling = fxs_ks
rxwink=300

usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=0.0
txgain=0.0
nationalprefix = 0
internationalprefix = 00
faxdetect=incoming
group=0
callgroup=1
pickupgroup=1
immediate=yes
context=from-pstn
channel => 1-2

________________________________________
now you can recompile asterisk
cd /usr/src/bristuff-0.2.0-RC8l/asterisk-1.2.4
make clean
make
make install

reboot...
________________________________________


that's all

[size=20px] donDisperato[/size]
Avatar utente
donDisperato
Expert
Expert
 
Messaggi: 876
Iscritto il: mar mag 10, 2005 8:54 am
Località: Bari
Ha ringraziato: 1 volta
Hai ringraziamenti: 4 volte


  • Argomento simile
    Risposte
    Visite
    Autore

Torna a Schede

Chi c’è in linea

Visitano il forum: Nessuno e 0 ospiti

cron