*

Benvenuto! Accedi o registrati.
Hai dimenticato l'e-mail di attivazione?


Talkho
Pagine: [1]
  Stampa  
Autore Discussione: Consigli Gli Gli Acquisi: PAP2 O Siemens C450 IP ?  (Letto 605 volte)
0 utenti e 1 Utente non registrato stanno visualizzando questa discussione.

Consigli Gli Gli Acquisi: PAP2 O Siemens C450 IP ?

ingens
Beginner
**
Messaggi: 39



Mostra profilo
Gennaio 18, 2007, 03:03:24 pm

Ho trovato un PAP2 a 65 euro, nuovo e con garanzia Italiana.

Inizialmente mi interessava acquistare un telefono IP ma col PAP2 ho il vantaggio di avere due telefoni (su una delle due porte ci mettero' un cordless). Di solito mi piace poco accozzare su dispositivi digitali della paccottiglia analogica (come faceva una volta la gente quando attaccava i telefoni analogici alle borchie ISDN). Insomma, ho paura che possa funzionare male.

Che mi consigliate?

In alternativa in un supermercato (dove non avrei mai pensato di trovare cose del genere) vendono dei siemens C450 IP a 89 euro (ma ce n'erano rimasti pochi), gli sono avanzati da Natale.
Registrato
VoceSuIP.com
« inserita:: Gennaio 18, 2007, 03:03:24 pm »


Centralino IP PBX - 3CX. Scarica la versione Gratuita!
 Registrato

#1 Re: Consigli Gli Gli Acquisi: PAP2 O Siemens C450 IP ?

MarcoR
Expert
****
Messaggi: 402



Mostra profilo
Gennaio 18, 2007, 10:26:11 pm

Ciao,

uso un PAP2 da tempo e ne sono pienamente soddisfatto. Non solo, come dici tu, ci puoi mettere due telefoni, ma puoi anche decidre che telefoni. Voglio dire, se domani vedi un telefono che ti piace lo compri e ce lo colleghi.

Il Siemens te lo tieni così come è.

Il prezzo del PAP2 è quello, con tendenza in discesa.

Ciao.

MarcoR
Registrato

#2 Re: Consigli Gli Gli Acquisi: PAP2 O Siemens C450 IP ?

ingens
Beginner
**
Messaggi: 39



Mostra profilo
Gennaio 18, 2007, 10:33:14 pm

Infatti mi sono quasi deciso per il PAP2. Il prezzo migliore l'ho trovato su un negozio a 2 Km da casa mia: 56.60 euro.

Come si comporta con WMI? Una volta leggevo in rete che faceva squillare i telefoni di continuo (perché notifica il messaggio in segreteria con uno squillino).
Registrato

#3 Re: Consigli Gli Gli Acquisi: PAP2 O Siemens C450 IP ?

MarcoR
Expert
****
Messaggi: 402



Mostra profilo
Gennaio 18, 2007, 10:42:11 pm

WMI?

Scusa la mia ignoranza, ma non riesco a capire a cosa ti riferisci.

Ciao.

MarcoR
Registrato

#4 Re: Consigli Gli Gli Acquisi: PAP2 O Siemens C450 IP ?

ingens
Beginner
**
Messaggi: 39



Mostra profilo
Gennaio 18, 2007, 10:54:15 pm

Ho fatto un errore a scrivere  :oops:

Volevo dire il MWI: è una segnalazione che indica la presenza di messaggi in segreteria.
Registrato

#5 Re: Consigli Gli Gli Acquisi: PAP2 O Siemens C450 IP ?

MarcoR
Expert
****
Messaggi: 402



Mostra profilo
Gennaio 18, 2007, 11:06:47 pm

Non saprei, la casella vocale è un servizio che non uso.

Il PAP2 l'ho usato direttamente con Skypho per diverso tempo, poi con Asterisk su un pc a casa ed ora con PBXes che è sempre Asterisk ma in remoto.


Proverò magari nel week-end ad attivare la casella vocale e ti faccio sapere.

Ciao.

MarcoR.
Registrato

#6 Re: Consigli Gli Gli Acquisi: PAP2 O Siemens C450 IP ?

Skumpic
Moderator
Guru
*****
Messaggi: 2058


Mostra profilo
Gennaio 19, 2007, 11:19:28 am

Segnala i messaggi in segreteria senza alcuna controindicazione.
Almeno per quello che ho potuto testare usando vira.
Senti un bipbipbip appena alzi la cornetta nel caso ci siano nuovi messaggi

ciao
Skumpic
Registrato

#7 Re: Consigli Gli Gli Acquisi: PAP2 O Siemens C450 IP ?

MarcoR
Expert
****
Messaggi: 402



Mostra profilo
Gennaio 19, 2007, 10:37:27 pm

Confermo.

Provato e funziona correttamente.

Se ci sono messaggi il segnale di "libero" è un diverso Dial Tone che è espressamente definito in Regional, è il MWI Dial Tone.

Ciao.

MarcoR.
Registrato
VoceSuIP.com
   

 Registrato
Pagine: [1]
  Stampa  
 
Vai a:  

utenti
Utenti in totale: 7411
Ultimo utente: tagant
Stats
Messaggi in totale: 86632
Discussioni in totale: 11824
Online Oggi: 31
Presenze Massime Online: 270
(Aprile 17, 2008, 04:22:27 pm)
Utenti online
Utenti: 0
Visitatori: 19
Totale: 19
News da 3CX
The 3CX Phone System IVR service is based on VXML and therefore integrates with the web server that you have chosen to use with 3CX. If there are problems with the web server integration, the ...img src="http://feeds.feedburner.com/~r/3CXVoIPBlog/~4/jNrCx1GR2wU" height="1" width="1"/
This article helps you recover from Backup and Restore Errors including some tips to make this operation quick and seamless. When a new major version is released, it is recommended to install the latest version. ...img src="http://feeds.feedburner.com/~r/3CXVoIPBlog/~4/X5HeUZffo-s" height="1" width="1"/
This guide describes the different caller ID formats and how to alter /rewrite the caller ID before it gets sent to the Telecoms provider when using beroFix VoIP Gateway cards. In this document we will use ...img src="http://feeds.feedburner.com/~r/3CXVoIPBlog/~4/ohHQkLTfnJo" height="1" width="1"/
With a Beronet Card, and proper configuration, you are able to choose the exact line/port on which you want to dial out. This feature is requested for lines that have different MSN/DID/DDI numbers. In addition ...img src="http://feeds.feedburner.com/~r/3CXVoIPBlog/~4/VcLTGU_QQC0" height="1" width="1"/
How to configure Secure SiP This is a complete guide that will provide detailed information on how to: 1. Setup 3CX Phone System with Secure SiP (TLS) (In this way the SiP messaging will be encrypted and ...img src="http://feeds.feedburner.com/~r/3CXVoIPBlog/~4/RjTpKSvFRgY" height="1" width="1"/
3CX Phone System V8 and later include the functionality to set the TimeZone and DST (Daylight Savings Time) parameters on phones via provisioning. 3CX PhoneSystem is delivered with example pre-configured default values set to EasternTime ...img src="http://feeds.feedburner.com/~r/3CXVoIPBlog/~4/pQvrYsYUl5g" height="1" width="1"/
NOTE: This device has been tested for Fax Calls and Voice Calls using firmware 1.2.1.5. Grandstream firmware versions are typically available from: http://www.grandstream.com/firmware.html. Depending on your geographic location and telecommunications provider, it may be necessary to ...img src="http://feeds.feedburner.com/~r/3CXVoIPBlog/~4/ot0bekHNwHo" height="1" width="1"/
This article describes how to setup Microsoft Exchange 2007/2010 server as a Unified Messaging Server and configure 3CX Phone System to use it for voice mail and auto attendants This guide has been tested with the following ...img src="http://feeds.feedburner.com/~r/3CXVoIPBlog/~4/CnmxV5NiIaw" height="1" width="1"/
3CX CRM Integration overview 3CX Assistant includes a CRM Integration module to allow it to integrate with Microsoft Outlook or Salesforce.com When a call arrives to your extension, you will be notified about it with a ...img src="http://feeds.feedburner.com/~r/3CXVoIPBlog/~4/FJmcvY0VqD8" height="1" width="1"/
Many businesses who are adopting VoIP Software PBX Systems are always looking for a way to cut down costs. That#8217;s where the Intel Atom N270 comes in the picture, which is  designed to deliver performance ...img src="http://feeds.feedburner.com/~r/3CXVoIPBlog/~4/2iwqr88zB9s" height="1" width="1"/
3CX provides monthly free training Webcasts, and the next one is scheduled for Thursday 11 March 2010 at 1500hrs (GMT+1). This will be presented via Microsoft Live Meeting using its built-in VoIP ...img src="http://feeds.feedburner.com/~r/3CXVoIPBlog/~4/CXdty1_32AY" height="1" width="1"/
Bulk importing extensions in the 3CX Phone System 3CX administrators need to plan ahead on how to construct their 3CX Phone System. Now it is very time consuming to create 1 extension at a time for ...img src="http://feeds.feedburner.com/~r/3CXVoIPBlog/~4/MBIm-kTm7_4" height="1" width="1"/
After high demand from 3CX administrators worldwide, we have finalized a version of the 3CX Assistant that is specifically designed for Windows Server OS with Terminal service roles enabled.  This installation package is available for ...img src="http://feeds.feedburner.com/~r/3CXVoIPBlog/~4/JGqox57xNS0" height="1" width="1"/
New 3CX Assistant version 8.11105 with improved TAPI driver supportimg src="http://feeds.feedburner.com/~r/3CXVoIPBlog/~4/x38Q3ybhhOU" height="1" width="1"/
This 10 minute presentation explains the unique selling points of 3CX #8211; what makes our system different and what its key features are.img src="http://feeds.feedburner.com/~r/3CXVoIPBlog/~4/UtWmtOhWNn8" height="1" width="1"/
London, UK #8211; February  17, 2010 -  Spitfire, the leading Internet Telephony Service Provider, has completed full Interoperability testing with 3CX and agreed to promote 3CX to Spitfire’s 200 strong partner channel. Spitfire has become ...img src="http://feeds.feedburner.com/~r/3CXVoIPBlog/~4/qVX8dQefP8o" height="1" width="1"/
3CX, the leading IP PBX software manufacturer, partners with EFL to help expand it’s UK channel businessimg src="http://feeds.feedburner.com/~r/3CXVoIPBlog/~4/UvE7o-zPMIs" height="1" width="1"/
3CX Application Exchange - 3rd Party application solution pageimg src="http://feeds.feedburner.com/~r/3CXVoIPBlog/~4/AmHmvM_k3Sc" height="1" width="1"/
Provisioning Cisco Linksys SPA 501,502, 504, 508 and 525 phones IP Phones with 3CX Phone Systemimg src="http://feeds.feedburner.com/~r/3CXVoIPBlog/~4/ZaIf44FA4ms" height="1" width="1"/
Cisco SPA Phones have the ability to look up for phone numbers and contacts in an Active Directory/LDAP. For this a template needs to be created and  the Cisco Phones need to be re-provisioned with ...img src="http://feeds.feedburner.com/~r/3CXVoIPBlog/~4/xhmlh5SQIYw" height="1" width="1"/