*

Benvenuto! Accedi o registrati.
Hai dimenticato l'e-mail di attivazione?


Talkho
Pagine: 1 ... 10 11 [12] 13
  Stampa  
Autore Discussione: Firmware 7270 All in One(54.04.80- v2.0.1 con labor DSL OK)  (Letto 22362 volte)
0 utenti e 1 Utente non registrato stanno visualizzando questa discussione.

#165 Re: Firmware 7270 All in One(54.04.76-Versione Definitiva v1.1 con labor DSL)

fritzerello
PrimoLivello
*
Messaggi: 18


Mostra profilo
Febbraio 01, 2010, 05:09:55 pm

Si la mia non è altro che la labor dsl con l'aggiunta dell'italiano e dell'annex A.
In serata se trovo tempo posso ricompilare una versione internazionale, per tutti, su base labor dsl, con le cose che non ha la labor dsl(multilingua, multiannex, segreteria telefonica).
In serata ulteriori news.
Luca

Ciao,

ho un problema con il wifi -n: ho due computer portatili che supportano il 802.11n, però al fritzbox si collegano solo con il 802.11g, ma mai con il .n.

Ho abilitato nella sezione WLAN il protocollo n, mi chiedo però perché non riesco a collegarmi utilizzando il WIFI più veloce..

Non ho istallato l'ultima versione anche perché quella che ho va bene:
Versione firmware 54.04.76 By Lucof2000 Telephone UMTS/GSM Internet Edition Musikbox v1.9.3-Beta 3


Grazie
Registrato
VoceSuIP.com
« Risposta #165 inserita:: Febbraio 01, 2010, 05:09:55 pm »


Centralino IP PBX - 3CX. Scarica la versione Gratuita!
 Registrato

#166 Re: Firmware 7270 All in One(54.04.76-Versione Definitiva v1.1 con labor DSL)

lucof2000
Advanced
***
Messaggi: 151


Mostra profilo
Febbraio 05, 2010, 07:11:58 pm

Ciao ragazzi, a breve una nuova versione è in arrivo basata sulle ultime labor.
Per fritzerello, il wifi mi ha sempre funzionato bene, anche se nel pc portatile mi va a 150 mb essendo un profilo diverso.
Ricontrolla che sia il portatile che il fritz sia abilitato il wifi n, altrimenti non vedo perchè non ti vada in n.
Registrato

#167 Re: Firmware 7270 All in One(54.04.80-Versione Definitiva v2.0 con labor DSL)

lucof2000
Advanced
***
Messaggi: 151


Mostra profilo
Febbraio 07, 2010, 10:04:30 pm

In prima pagina la nuova versione, attenzione, il menù wlan è stato cambiato e dovrei ritradurre tutte le pagine, ma per ora è intuitivo, traduzione nella prossima versione.
Per il resto non funge la parte dsl labor, perchè il fw è basato sulla nuova versione labor telefonica.
Conto per fine settimana di mettere fuori anche una versione basata solo sull'ultima labor dsl di inzio dicembre.
Saluti a tutti
Luca
Registrato

#168 Re: Firmware 7270 All in One(54.04.76-Versione Definitiva v1.1 con labor DSL)

fritzerello
PrimoLivello
*
Messaggi: 18


Mostra profilo
Febbraio 18, 2010, 09:37:59 am

Ciao ragazzi, a breve una nuova versione è in arrivo basata sulle ultime labor.
Per fritzerello, il wifi mi ha sempre funzionato bene, anche se nel pc portatile mi va a 150 mb essendo un profilo diverso.
Ricontrolla che sia il portatile che il fritz sia abilitato il wifi n, altrimenti non vedo perchè non ti vada in n.

Provo ad installare l'ultimissima versione del tuo firmware, vediamo che cosa succede.

Posso installare la nuova versione direttamente sopra quella precedente che ho installato (Versione firmware 54.04.76 By Lucof2000 Telephone UMTS/GSM Internet Edition Musikbox v1.9.3-Beta 3) oppure devo passare dal recovery?

Grazie
« Ultima modifica: Febbraio 18, 2010, 09:46:09 am da fritzerello » Registrato

#169 Re: Firmware 7270 All in One(54.04.80-Versione Definitiva v2.0 con labor DSL)

madago
PrimoLivello
*
Messaggi: 15


Mostra profilo
Febbraio 19, 2010, 06:46:41 pm

Caro lucof,ho montato il tuo fw su un fritz!7270 1&1 8 mb, tutto ok.
E' un paio di gg che cerco di cambiare fw per mettere "openvpn" ..
Ho provato con freetz , con recovery originali e quant'altro ...

L'unico fw che riesco a sbattere dentro correttamente è il tuo !!!!!
La domanda è .. posso disassemblare il tuo e mettere dentro openvpn o meglio .. hai una versione con Openvpn installato ??

Scusa se ti rompo ma le sto provando tutte senza successo ...

Ciao,grazie !!!!
Registrato

#170 Re: Firmware 7270 All in One(54.04.80- v2.0.1 con labor DSL OK)

alessandro66
Beginner
**
Messaggi: 97



Mostra profilo
Febbraio 22, 2010, 04:31:38 pm

Ciao Lucof

Tutto ok installato

Labor-Version 54.04.80 by lucof2000 con aggiunta labor dsl V.2.0.1-basato su labor 16376

stasera testo qualcosina

ottimo lavoro
Registrato

#171 Re: Firmware 7270 All in One(54.04.80- v2.0.1 con labor DSL OK)

Crake
PrimoLivello
*
Messaggi: 19


Mostra profilo
Febbraio 24, 2010, 10:51:03 pm

Ciao Lucof

Tutto ok installato

Labor-Version 54.04.80 by lucof2000 con aggiunta labor dsl V.2.0.1-basato su labor 16376

stasera testo qualcosina

ottimo lavoro


Any chance on get this wonderfull firmware in English, or even more dificult in Portuguese ??

I have the Lucof2000 *.54 version but in English.

Thanks and sorry not to write in italian !
Registrato

#172 Re: Firmware 7270 All in One(54.04.80- v2.0.1 con labor DSL OK)

lucof2000
Advanced
***
Messaggi: 151


Mostra profilo
Febbraio 24, 2010, 11:40:28 pm

Tomorrow upload one version in English, Portuguese does not exist for Fritz.
Registrato

#173 Re: Firmware 7270 All in One(54.04.80- v2.0.1 con labor DSL OK)

Crake
PrimoLivello
*
Messaggi: 19


Mostra profilo
Febbraio 25, 2010, 12:12:42 am

Tomorrow upload one version in English, Portuguese does not exist for Fritz.

OK, thank you very very very much !!!

P.S. By the way, is there anyone or anyplace that i can find help in using my Fritz!Box 7270 (with your great fw) connected to fiber (not dsl anymore), instead of the little piece of sh*** Thomson 754 that the operator provided me? It also connect to the phone.
Registrato

#174 Re: Firmware 7270 All in One(54.04.80- v2.0.1 con labor DSL OK)

lonegunman
Se volete che la funzione non venga scoperta scrivetela nel manuale !
Guru
*****
Messaggi: 1579



Mostra profilo
Febbraio 25, 2010, 03:54:01 pm

if you have both the username and password for DSL and voip service you can do that
Registrato

#175 Re: Firmware 7270 All in One(54.04.80- v2.0.1 con labor DSL OK)

Crake
PrimoLivello
*
Messaggi: 19


Mostra profilo
Febbraio 25, 2010, 07:50:56 pm

if you have both the username and password for DSL and voip service you can do that

OK, but i remerber that is fiber, not DSL. It's a PPoe connection with VPI 0,35. Still have to use an Username and Password.

Btw, to connect the phone and the fiber shall i still use the Y cable ??

P.S. Is the version on English available?
Registrato

#176 Re: Firmware 7270 All in One(54.04.80- v2.0.1 con labor DSL OK)

lucof2000
Advanced
***
Messaggi: 151


Mostra profilo
Febbraio 25, 2010, 11:07:37 pm

P.S. Is the version on English available?
http://rapidshare.com/files/355875388/7270-lucof2000-54.04.80-allinone-ver2.0.1-labordsl-ENG-DE_8mb_.image
Registrato

#177 Re: Firmware 7270 All in One(54.04.80- v2.0.1 con labor DSL OK)

Crake
PrimoLivello
*
Messaggi: 19


Mostra profilo
Febbraio 25, 2010, 11:27:32 pm


You're an Angel !!!

Thanks a lot, Dude.
Registrato

#178 Re: Firmware 7270 All in One(54.04.80- v2.0.1 con labor DSL OK)

Crake
PrimoLivello
*
Messaggi: 19


Mostra profilo
Marzo 01, 2010, 11:02:15 pm

I find out that to connect fiber to my Fritz i need a wan port just like the one that the operator provided: Thomson 754.

Anyone knows that it can be done on the Fritz!Box 7270 ??

Thanks a lot.
Registrato

#179 Re: Firmware 7270 All in One(54.04.80- v2.0.1 con labor DSL OK)

Tokka
Se volete aiuto, aiutate prima chi ne sa meno di voi.
Guru
*****
Messaggi: 3646



Mostra profilo
Marzo 01, 2010, 11:47:11 pm

The default wan port is lan1 when you set connection via lan Occhiolino
Registrato
VoceSuIP.com
   

 Registrato
Pagine: 1 ... 10 11 [12] 13
  Stampa  
 
Vai a:  

utenti
Utenti in totale: 7419
Ultimo utente: angelo@123
Stats
Messaggi in totale: 86688
Discussioni in totale: 11836
Online Oggi: 39
Presenze Massime Online: 270
(Aprile 17, 2008, 04:22:27 pm)
Utenti online
Utenti: 0
Visitatori: 14
Totale: 14
News da 3CX
Introduction This chapter gives you an overview of how a call is established within 3CX and how you can trace through these steps by reading the server activity log. The Server activity log can be accessed ...img src="http://feeds.feedburner.com/~r/3CXVoIPBlog/~4/2un4HsisTsk" height="1" width="1"/
When using a virtualized operating system and 3CX Phone System, you may experience Stuttering voice quality if you have not configured your virtual environment correctly. This article explains how pm timers on the machine may ...img src="http://feeds.feedburner.com/~r/3CXVoIPBlog/~4/728vQ0naXsM" height="1" width="1"/
3CX is now providing additional free training Webcasts on more advanced topics, and the next one is scheduled for Thursday 25 March 2010 at 1500hrs (GMT+1). This will be presented via Microsoft Live ...img src="http://feeds.feedburner.com/~r/3CXVoIPBlog/~4/hE2vk9Yh5YU" height="1" width="1"/
3CX Phone System can be installed on most versions of Windows. Below is a complete list of supported and unsupported operating systems. Note: Unsupported does not necessarily mean that 3CX will not work, however ...img src="http://feeds.feedburner.com/~r/3CXVoIPBlog/~4/C-9pMOJHjWc" height="1" width="1"/
The 3CX Phone System IVR service is based on VXML and therefore integrates with the web server that you have chosen to use with 3CX. If there are problems with the web server integration, the ...img src="http://feeds.feedburner.com/~r/3CXVoIPBlog/~4/jNrCx1GR2wU" height="1" width="1"/
This article helps you recover from Backup and Restore Errors including some tips to make this operation quick and seamless. When a new major version is released, it is recommended to install the latest version. ...img src="http://feeds.feedburner.com/~r/3CXVoIPBlog/~4/X5HeUZffo-s" height="1" width="1"/
This guide describes the different caller ID formats and how to alter /rewrite the caller ID before it gets sent to the Telecoms provider when using beroFix VoIP Gateway cards. In this document we will use ...img src="http://feeds.feedburner.com/~r/3CXVoIPBlog/~4/ohHQkLTfnJo" height="1" width="1"/
With a Beronet Card, and proper configuration, you are able to choose the exact line/port on which you want to dial out. This feature is requested for lines that have different MSN/DID/DDI numbers. In addition ...img src="http://feeds.feedburner.com/~r/3CXVoIPBlog/~4/VcLTGU_QQC0" height="1" width="1"/
How to configure Secure SiP This is a complete guide that will provide detailed information on how to: 1. Setup 3CX Phone System with Secure SiP (TLS) (In this way the SiP messaging will be encrypted and ...img src="http://feeds.feedburner.com/~r/3CXVoIPBlog/~4/RjTpKSvFRgY" height="1" width="1"/
3CX Phone System V8 and later include the functionality to set the TimeZone and DST (Daylight Savings Time) parameters on phones via provisioning. 3CX PhoneSystem is delivered with example pre-configured default values set to EasternTime ...img src="http://feeds.feedburner.com/~r/3CXVoIPBlog/~4/pQvrYsYUl5g" height="1" width="1"/
NOTE: This device has been tested for Fax Calls and Voice Calls using firmware 1.2.1.5. Grandstream firmware versions are typically available from: http://www.grandstream.com/firmware.html. Depending on your geographic location and telecommunications provider, it may be necessary to ...img src="http://feeds.feedburner.com/~r/3CXVoIPBlog/~4/ot0bekHNwHo" height="1" width="1"/
This article describes how to setup Microsoft Exchange 2007/2010 server as a Unified Messaging Server and configure 3CX Phone System to use it for voice mail and auto attendants This guide has been tested with the following ...img src="http://feeds.feedburner.com/~r/3CXVoIPBlog/~4/CnmxV5NiIaw" height="1" width="1"/
3CX CRM Integration overview 3CX Assistant includes a CRM Integration module to allow it to integrate with Microsoft Outlook or Salesforce.com When a call arrives to your extension, you will be notified about it with a ...img src="http://feeds.feedburner.com/~r/3CXVoIPBlog/~4/FJmcvY0VqD8" height="1" width="1"/
Many businesses who are adopting VoIP Software PBX Systems are always looking for a way to cut down costs. That#8217;s where the Intel Atom N270 comes in the picture, which is  designed to deliver performance ...img src="http://feeds.feedburner.com/~r/3CXVoIPBlog/~4/2iwqr88zB9s" height="1" width="1"/
3CX provides monthly free training Webcasts, and the next one is scheduled for Thursday 11 March 2010 at 1500hrs (GMT+1). This will be presented via Microsoft Live Meeting using its built-in VoIP ...img src="http://feeds.feedburner.com/~r/3CXVoIPBlog/~4/CXdty1_32AY" height="1" width="1"/
3CX administrators need to plan ahead on how to construct their 3CX Phone System. Now it is very time consuming to create 1 extension at a time for each user, with their settings and provisioning. ...img src="http://feeds.feedburner.com/~r/3CXVoIPBlog/~4/MBIm-kTm7_4" height="1" width="1"/
After high demand from 3CX administrators worldwide, we have finalized a version of the 3CX Assistant that is specifically designed for Windows Server OS with Terminal service roles enabled.  This installation package is available for ...img src="http://feeds.feedburner.com/~r/3CXVoIPBlog/~4/JGqox57xNS0" height="1" width="1"/
New 3CX Assistant version 8.11105 with improved TAPI driver supportimg src="http://feeds.feedburner.com/~r/3CXVoIPBlog/~4/x38Q3ybhhOU" height="1" width="1"/
This 10 minute presentation explains the unique selling points of 3CX #8211; what makes our system different and what its key features are.img src="http://feeds.feedburner.com/~r/3CXVoIPBlog/~4/UtWmtOhWNn8" height="1" width="1"/
London, UK #8211; February  17, 2010 -  Spitfire, the leading Internet Telephony Service Provider, has completed full Interoperability testing with 3CX and agreed to promote 3CX to Spitfire’s 200 strong partner channel. Spitfire has become ...img src="http://feeds.feedburner.com/~r/3CXVoIPBlog/~4/qVX8dQefP8o" height="1" width="1"/