*

Benvenuto! Accedi o registrati.
Hai dimenticato l'e-mail di attivazione?


Pagine: [1]
  Stampa  
Autore Discussione: Consigli Gli Gli Acquisi: PAP2 O Siemens C450 IP ?  (Letto 615 volte)
0 utenti e 1 Utente non registrato stanno visualizzando questa discussione.

Consigli Gli Gli Acquisi: PAP2 O Siemens C450 IP ?

ingens
Beginner
**
Messaggi: 39



Mostra profilo
Gennaio 18, 2007, 03:03:24 pm

Ho trovato un PAP2 a 65 euro, nuovo e con garanzia Italiana.

Inizialmente mi interessava acquistare un telefono IP ma col PAP2 ho il vantaggio di avere due telefoni (su una delle due porte ci mettero' un cordless). Di solito mi piace poco accozzare su dispositivi digitali della paccottiglia analogica (come faceva una volta la gente quando attaccava i telefoni analogici alle borchie ISDN). Insomma, ho paura che possa funzionare male.

Che mi consigliate?

In alternativa in un supermercato (dove non avrei mai pensato di trovare cose del genere) vendono dei siemens C450 IP a 89 euro (ma ce n'erano rimasti pochi), gli sono avanzati da Natale.
Registrato
VoceSuIP.com
« inserita:: Gennaio 18, 2007, 03:03:24 pm »


Centralino IP PBX - 3CX. Scarica la versione Gratuita!
 Registrato

#1 Re: Consigli Gli Gli Acquisi: PAP2 O Siemens C450 IP ?

MarcoR
Expert
****
Messaggi: 402



Mostra profilo
Gennaio 18, 2007, 10:26:11 pm

Ciao,

uso un PAP2 da tempo e ne sono pienamente soddisfatto. Non solo, come dici tu, ci puoi mettere due telefoni, ma puoi anche decidre che telefoni. Voglio dire, se domani vedi un telefono che ti piace lo compri e ce lo colleghi.

Il Siemens te lo tieni così come è.

Il prezzo del PAP2 è quello, con tendenza in discesa.

Ciao.

MarcoR
Registrato

#2 Re: Consigli Gli Gli Acquisi: PAP2 O Siemens C450 IP ?

ingens
Beginner
**
Messaggi: 39



Mostra profilo
Gennaio 18, 2007, 10:33:14 pm

Infatti mi sono quasi deciso per il PAP2. Il prezzo migliore l'ho trovato su un negozio a 2 Km da casa mia: 56.60 euro.

Come si comporta con WMI? Una volta leggevo in rete che faceva squillare i telefoni di continuo (perché notifica il messaggio in segreteria con uno squillino).
Registrato

#3 Re: Consigli Gli Gli Acquisi: PAP2 O Siemens C450 IP ?

MarcoR
Expert
****
Messaggi: 402



Mostra profilo
Gennaio 18, 2007, 10:42:11 pm

WMI?

Scusa la mia ignoranza, ma non riesco a capire a cosa ti riferisci.

Ciao.

MarcoR
Registrato

#4 Re: Consigli Gli Gli Acquisi: PAP2 O Siemens C450 IP ?

ingens
Beginner
**
Messaggi: 39



Mostra profilo
Gennaio 18, 2007, 10:54:15 pm

Ho fatto un errore a scrivere  :oops:

Volevo dire il MWI: è una segnalazione che indica la presenza di messaggi in segreteria.
Registrato

#5 Re: Consigli Gli Gli Acquisi: PAP2 O Siemens C450 IP ?

MarcoR
Expert
****
Messaggi: 402



Mostra profilo
Gennaio 18, 2007, 11:06:47 pm

Non saprei, la casella vocale è un servizio che non uso.

Il PAP2 l'ho usato direttamente con Skypho per diverso tempo, poi con Asterisk su un pc a casa ed ora con PBXes che è sempre Asterisk ma in remoto.


Proverò magari nel week-end ad attivare la casella vocale e ti faccio sapere.

Ciao.

MarcoR.
Registrato

#6 Re: Consigli Gli Gli Acquisi: PAP2 O Siemens C450 IP ?

Skumpic
Moderator
Guru
*****
Messaggi: 2058


Mostra profilo
Gennaio 19, 2007, 11:19:28 am

Segnala i messaggi in segreteria senza alcuna controindicazione.
Almeno per quello che ho potuto testare usando vira.
Senti un bipbipbip appena alzi la cornetta nel caso ci siano nuovi messaggi

ciao
Skumpic
Registrato

#7 Re: Consigli Gli Gli Acquisi: PAP2 O Siemens C450 IP ?

MarcoR
Expert
****
Messaggi: 402



Mostra profilo
Gennaio 19, 2007, 10:37:27 pm

Confermo.

Provato e funziona correttamente.

Se ci sono messaggi il segnale di "libero" è un diverso Dial Tone che è espressamente definito in Regional, è il MWI Dial Tone.

Ciao.

MarcoR.
Registrato
VoceSuIP.com
   

 Registrato
Pagine: [1]
  Stampa  
 
Vai a:  

Recent
[Oggi alle 07:11:19 pm]

[Oggi alle 05:14:33 pm]

[Oggi alle 04:55:24 pm]

[Oggi alle 04:45:44 pm]

[Oggi alle 03:53:00 pm]

[Oggi alle 01:12:23 pm]

[Oggi alle 12:33:38 pm]

[Oggi alle 12:01:20 pm]

[Oggi alle 10:48:04 am]

da wolf
[Oggi alle 08:19:56 am]
utenti
Utenti in totale: 7421
Ultimo utente: Freedom
Stats
Messaggi in totale: 86709
Discussioni in totale: 11841
Online Oggi: 54
Presenze Massime Online: 270
(Aprile 17, 2008, 04:22:27 pm)
Utenti online
Utenti: 3
Visitatori: 28
Totale: 31
News da 3CX
3CX Assistant allows you to quickly launch calls by double clicking on an extension or a missed call. It also integrates with Outlook to allow you to quickly dial a number in your contact ...img src="http://feeds.feedburner.com/~r/3CXVoIPBlog/~4/5sPLAw8SuGI" height="1" width="1"/
Introduction DTMF (dual tone multi frequency) is the signal to the phone company that you generate when you press an ordinary telephone#8217;s touch keys. In the United States, it#8217;s known as a #8220;Touchtone#8221; phone. DTMF has ...img src="http://feeds.feedburner.com/~r/3CXVoIPBlog/~4/8jHnEWYWWWw" height="1" width="1"/
Helping our Partners build their business and revenue 3CX Asia/Pacific recently hosted a partner training day at Microsoft Australia headquarters in Sydney Australia. Partners were free to come to this whole day event and all parts ...img src="http://feeds.feedburner.com/~r/3CXVoIPBlog/~4/zn62kUbtac4" height="1" width="1"/
Introduction This chapter gives you an overview of how a call is established within 3CX and how you can trace through these steps by reading the server activity log. The Server activity log can be accessed ...img src="http://feeds.feedburner.com/~r/3CXVoIPBlog/~4/2un4HsisTsk" height="1" width="1"/
When using a virtualized operating system and 3CX Phone System, you may experience Stuttering voice quality if you have not configured your virtual environment correctly. This article explains how pm timers on the machine may ...img src="http://feeds.feedburner.com/~r/3CXVoIPBlog/~4/728vQ0naXsM" height="1" width="1"/
3CX is now providing additional free training Webcasts on more advanced topics, and the next one is scheduled for Thursday 25 March 2010 at 1500hrs (GMT+1). This will be presented via Microsoft Live ...img src="http://feeds.feedburner.com/~r/3CXVoIPBlog/~4/hE2vk9Yh5YU" height="1" width="1"/
3CX Phone System can be installed on most versions of Windows. Below is a complete list of supported and unsupported operating systems. Note: Unsupported does not necessarily mean that 3CX will not work, however ...img src="http://feeds.feedburner.com/~r/3CXVoIPBlog/~4/C-9pMOJHjWc" height="1" width="1"/
The 3CX Phone System IVR service is based on VXML and therefore integrates with the web server that you have chosen to use with 3CX. If there are problems with the web server integration, the ...img src="http://feeds.feedburner.com/~r/3CXVoIPBlog/~4/jNrCx1GR2wU" height="1" width="1"/
This article helps you recover from Backup and Restore Errors including some tips to make this operation quick and seamless. When a new major version is released, it is recommended to install the latest version. ...img src="http://feeds.feedburner.com/~r/3CXVoIPBlog/~4/X5HeUZffo-s" height="1" width="1"/
This guide describes the different caller ID formats and how to alter /rewrite the caller ID before it gets sent to the Telecoms provider when using beroFix VoIP Gateway cards. In this document we will use ...img src="http://feeds.feedburner.com/~r/3CXVoIPBlog/~4/ohHQkLTfnJo" height="1" width="1"/
This article explains the main fields included in a SIP INVITE, which is sent to set-up a VoIP call. A SIP INVITE message contains typically between 4 and 6 header entries with contact information inside ...img src="http://feeds.feedburner.com/~r/3CXVoIPBlog/~4/i3a0WR1fpKI" height="1" width="1"/
With a Beronet Card, and proper configuration, you are able to choose the exact line/port on which you want to dial out. This feature is requested for lines that have different MSN/DID/DDI numbers. In addition ...img src="http://feeds.feedburner.com/~r/3CXVoIPBlog/~4/VcLTGU_QQC0" height="1" width="1"/
All SIP Phone calls consist of 2 channels: Messaging – SIP Media #8211; RTP Messaging is carried using UDP or TCP (normally UDP) SIP packets – It is used for device registration, call setup/teardown, on-hold notification, call ...img src="http://feeds.feedburner.com/~r/3CXVoIPBlog/~4/cJacJkoLL9A" height="1" width="1"/
How to configure Secure SiP This is a complete guide that will provide detailed information on how to: 1. Setup 3CX Phone System with Secure SiP (TLS) (In this way the SiP messaging will be encrypted and ...img src="http://feeds.feedburner.com/~r/3CXVoIPBlog/~4/RjTpKSvFRgY" height="1" width="1"/
3CX Phone System V8 and later include the functionality to set the TimeZone and DST (Daylight Savings Time) parameters on phones via provisioning. 3CX PhoneSystem is delivered with example pre-configured default values set to EasternTime ...img src="http://feeds.feedburner.com/~r/3CXVoIPBlog/~4/pQvrYsYUl5g" height="1" width="1"/
NOTE: This device has been tested for Fax Calls and Voice Calls using firmware 1.2.1.5. Grandstream firmware versions are typically available from: http://www.grandstream.com/firmware.html. Depending on your geographic location and telecommunications provider, it may be necessary to ...img src="http://feeds.feedburner.com/~r/3CXVoIPBlog/~4/ot0bekHNwHo" height="1" width="1"/
This article describes how to setup Microsoft Exchange 2007/2010 server as a Unified Messaging Server and configure 3CX Phone System to use it for voice mail and auto attendants This guide has been tested with the following ...img src="http://feeds.feedburner.com/~r/3CXVoIPBlog/~4/CnmxV5NiIaw" height="1" width="1"/
3CX CRM Integration overview 3CX Assistant includes a CRM Integration module to allow it to integrate with Microsoft Outlook or Salesforce.com When a call arrives to your extension, you will be notified about it with a ...img src="http://feeds.feedburner.com/~r/3CXVoIPBlog/~4/quyQgovI018" height="1" width="1"/
Many businesses who are adopting VoIP Software PBX Systems are always looking for a way to cut down costs. That#8217;s where the Intel Atom N270 comes in the picture, which is  designed to deliver performance ...img src="http://feeds.feedburner.com/~r/3CXVoIPBlog/~4/2iwqr88zB9s" height="1" width="1"/
3CX provides monthly free training Webcasts, and the next one is scheduled for Thursday 11 March 2010 at 1500hrs (GMT+1). This will be presented via Microsoft Live Meeting using its built-in VoIP ...img src="http://feeds.feedburner.com/~r/3CXVoIPBlog/~4/CXdty1_32AY" height="1" width="1"/